Car Air Condition Recharging - Right Guidance
The air conditioning unit of a car is one of its most sophisticated parts. But most of the car owners, especially those who don’t have particular interest in mechanical engineering, don’t know much about the car’s air conditioning system. This makes it difficult for them to take care of the unit. Thus, they are left with no choice but to call a mechanic and pay hefty amount for his service.
But people don’t know that they can recharge their car AC compressor on their own. All they need is the right guidance to do it and the necessary equipment. Components like the right kind of refrigerant are very important. If you want to personally recharge your car AC then make sure that you only use the suitably pressurized refrigerant. You can refer to your car’s user manual to know which kind of refrigerant is most suitable for it. Never, ever mix different kinds of refrigerants because it won’t recharge the AC compressor effectively. Make sure that you don’t use any of flammable refrigerants as they are extremely dangerous.
Once you have gathered all the equipment and the refrigerant, you can start the process of recharging the AC. But before that, cover your eyes with protective goggles and wear thick gloves on your hands. Make sure that you wear full sleeves and most of your body is covered. This is because car refrigerant may cause burns in case of some kind of mishap.
You can purchase a recharge kit from any local car AC parts shop or your mechanic. Make sure that the kit has a pressure gauge which helps in the recharging and helps you keep track of the quantity of refrigerant inside the AC system.
First of all, you should find out the level of refrigerant in your system. For this fit the charging pipe in low pressure on the port. If there is no refrigerant in the system, then make sure that you get rid of all the moisture. The absence of any refrigerant is a sign that there are some leaks in your system. To detect the point of leakage, spray soapy water is the fittings.
After this, check the A/C compressor and clean any debris, dirt or dust in the condensing coil. Then, connect the refrigerant can, recharge valve and hose together. Turn the valve to puncture valves. This will ensure that there is no moisture inside the system. Then, start the engine and turn the AC. Open the valve so that the refrigerant can reach the hose.
Don’t remove the can’s cover and then close the valve and disconnect the hose. If you have done this right and the refrigerant is enough for your system, then your car AC will give great performance.
Now that you know how to recharge you car’s air conditioner, stop spending money on expensive mechanics and do it yourself.
